Straight Spline Gears
Straight spline gears and shafts have reduced specific sliding. Reduced gear sliding has an affect on low speed meshes, where sliding losses predominate.The efficiency of these gears is also increased by the use of less viscous oil.
The tooth profile geometry is uniquely defined by the arc shaped path of contact. The gears manufactured by the same rack cutter have the concave convex mesh. The result of enlarged reduced radius of curvature has as a consequence reduced pressure and better lubrication conditions. The geometry of non-involute gear tooth provides substantially higher capacity than any other gearing.
The disadvantages of the non-involute gearing are lower transverse contact ratio and great sensitivity to the center distance accuracy.
In the 60’s and 70’s these gears were very popular as they were most convent to make as pressure angle was zero.
We have in-house facility for straight spline grinding to achieve best possible results.
See also : Types of Gears
Send us your requirements for straight splined shafts and gears just by clicking on this link goela.parts@gmail.com or call us at +919810645100 and you will talk to Vishal Goela at Goela Engineers (a gear manufacturing company) to discuss more. We shall be more than happy to offer our best services and products.